 |
A breaking resistor is a high wattage resistors used in motor control to help a motor stop quickly through a process known as Dynamic Breaking. |
| |
|
| |
Our high power wire wound resistors exhibit high performance life and are extensively used across industry. These resistors comply to international quality & safety standards.. |
 |
A wide range of Resistance available in 40w to 10000 w. |
|
Values from E01 to 100 k. |
|
Excellent heat transfer & small dimension. |
|
Good Electrical Stability, Reliability & Mechanically strength. |
|
Non inductive version available. |
|
Customized termination, mounting arrangements available on request. |
|
Higher wattage resistors for special applications can be made. |
| |
Range : E1 - 100 K
Power : 40 W - 10000 W
Tolerance : +5%
Operating Temp. |
-55°C - +275°C |
Temp. Coefficient |
50 ppm/°C, 100 ppm/°C, 260 ppm/°C |
Insulation Resistance |
Insulation Resistance |
Short Time Over Load |
10 X Wattage Rating, 5 sec |
Dielectric Strength |
AC 1000V, 2000V for 1 min |
Moisture resistance |
temp 40°C moisture 95% DC100v500h |
| Thermal Shock |
Wattage Rating 30min. -25°C, 15min |
Vibration |
10c/c ~ 50 c/s ~ 10 c/s (1min) -2h each of paralleled and right angle. |
Load Life |
Wattage Rating 1.5 h On, 30min off, 1000h |
Derate to zero |
at 275°C |
|
|
