Wire Wound Resistors

A resistor is a two terminal electronic component that produces a voltage across its terminals that is proportional to the electric current passing through it in accordance with Ohm's law :
V = IR
W=I2R
   
 

Our wire wound resistors exhibit high performance life and are being extensively used in electronic industries such as public address systems, UPS, Invertor, Panels etc.

A wide range of Resistance available in 1w to 10000 w.
Values from E001 to 500 k.
Non inductive version available.
Higher wattage resistors for special applications can be made.
   
  Resistors Adjustable / Fixed
(Silicone Coated)
Range : E 001 - 500 K
Power : 1 W - 5000 W
Tolerance : +10%, +5%, +2%, +1%,
TC + 50 PPM, 100 PPM, 200 PPM
   
  STEAD Brand Wirewound resistors are wound with best quality Ni/Cr or Ni/Cr Alloy Resistance Wire having very low temp. Co-efficient on highly alumina based porcelain pipes/rods and wire is protected with high temp. Resistance Compound. The highly plated tin copper wires are being used for terminations,
 

Range List & Sizes(for Reference)

Watts

Approx. Size in
(mm)

Ohms
Min.-Max.

1w
20*5
E.1-10K
2w
25*7
E.025-10K
5w
26*9
E.025-20K
10w
46*9
E.02-100K
15w
50*10
E.01-100K
20w
52*14
E.02-100K
25w
65*16
E.02-200K
30w
78*14
E.02-250K
40w
75*20
E.02-400K
50w
100*20
E.02-500K
75w
150*20
E.02-500K
100w
150*26
E.02-500K
150w
170*34
E.02-500K
200w
200*34
E.02-500K
250w
250*34
E.02-500K
300w
300*34
5E-500K
400w
250*62
5E-500K
500w
300*62
5E-500K
600w
350*62
5E-500K
750w
400*62
5E-500K
1000w
500*62
5E--600K
1250w
550*62
25E-750K
1500w
600*62
25E-1000K

 

 

* The above is a tentative range list, for any enquiry apart form the above
please feel free to contact.

Tolerance available + 10% - + 1% (Closer tolerance on request)
Construction : Non-inductive resistors are available.
Terminals for 1 W to 20 W are tin platted copper wire/Brass Strip Tin Platted.
25 W and above brass strip (Tin Platted)

 
2015 Stead Electronic Industries.
Website by RPXL