| |
Wire Wound Potentiometer
 |
A Potentiometer is commonly known as "pot" is a three terminal resistor with a sliding contact that forms an adjustable voltage divder.
Potentiometer are commonly used to control electrical devices such as volume control on audio equipments. |
| |
|
| |
Our Potentiometers (Torodial Rheostats) are manufactured in a wide range, which are extensively used in electronic industries. |
 |
A wide range of Potentiometers are available from 25w to 1000w. |
|
Good Electrical Stability, Reliability & Mechanically strength. |
|
Values from 1 ohms to 20k ohms. |
|
Customized termination, mounting arrangements available on request. |
|
Higher wattage Potentiometers for special applications can be made. |
| |
(Single / Gang Type)
Range : 1 ohms - 20 K ohms
Power : 25 W - 1000 W
Tolerance : +/- 5%, +/- 10%
|
TYPE |
RANGE IN OHMS.
|
|
MIN. |
MAX. |
PT25 |
1 |
2K |
PT50 |
1 |
3K |
PT100 |
2.5 |
7.5K |
PT150 |
2.5 |
7.5K |
PT200 |
5 |
9K |
| PT300 |
10 |
12.5K |
PT400 |
10 |
12.5K |
PT500 |
10 |
15K |
PT1000 |
10 |
20K |
|
These Potentiometer are manufactured in Open Yype,Perforated Type and Graded Winding Type.
Customized Potentiometer (Dual or Multiple Core)are made as per requirements.
Standard Tolerance+-10% but closer tolerence can also be supplied.
SPECIAL FEATURES:
The FORMER is made of vitrified porcelain.
The best quality CU/NI or NICKLE-CHROMIUM alloy Wire/Tapes depending upon the requirements is used.
Copper Graphite permanently lubricated brush contact is used.
The Winding is held firmly by VITEROUS ENAMEL or SILICON COATING.
Bright Zinc/Nickel plated spring steel BRUSH ARM is used.
Glazed porcelain brush arm INSULATING rotor is involved.
Best quality SPINDLE is fitted.
|
|
